Thank you for purchasing the FurDozer! We bet you are excited to remove all that stubborn pet hair, but before you start, we recommend following the steps below and watching these helpful instructional videos. Also, don't forget to sign up for your free one-year manufacturer's warranty!
FurDozer X4 Demo Video
The FurDozer X4 features four fur-busting tools:
- Metal Bar (Top) - This is the Tough Mode of the FurDozer X4. The metal bar removes even the most embedded hair with ease. However, it can snag on delicate fabrics, so we recommend testing a small part of the surface first before you proceed. To use the metal bar, hold the tool at an angle so the bar contacts the fabric, then pull back lightly in long strokes. The metal bar does not require a lot of pressure to work, so start lightly and add more pressure if needed.
- Three Larger Ridges (Top) - This side works on most fabrics or surfaces, but the taller ridges make it a better choice for thick fleece blankets or deep-pile/shag carpets. To use this side, hold the FurDozer flat, apply firm pressure, and pull towards you. The rubber edges require you to apply more pressure than the metal bar.
- Eight Small Ridges (Bottom) - This side works on all surfaces, including carpets, furniture, and cars. To use, hold the FurDozer flat so all ridges make contact with the surface. Then, apply pressure and pull towards you. When using on loose materials, it's important to hold the fabric taught while cleaning.
- Large Squeegee - On the bottom of the FurDozer, you’ll see that the last ridge is a larger offset squeegee blade. This squeegee is for collecting hair into piles for easy pickup.
Click here to sign up for your free 1-year manufacturer's warranty.